MDNinety-sixSix placeLEDIntelligent Digital Display Meter
MD96Six-bit intelligent digital display meter is mainly used to measure displacement, length, liquid level and so on.
I. Technical Characteristics
OneInternational General Purpose96XForty-eightX112MmStandard chassis, six bitsZero point five sixinchLEDDigital display.
Twoinput1And input2Constituting a dual input, identifiable phase isNinetyDegree encoder pulse signal.
ThreeThe input signals of level pulse and switching quantity are compatible.
4.Set two control values.Two-way relay output, control or alarm.
FiveThe ratio can be set to determine the proportional relationship between the number of input pulses and the display value.
6.The current counting value and setting value are not lost when power failure occurs.
SevenExternal sensor:Angular and linear displacement grating sensors.Provision of sensors5V(40mA)
12V(30mA24V (30MA)Voltage (other voltage can be customized).
II. Technical parameters
OnePower supply:AC220V 50Hz（Other voltage can be customized)
TwoInput resistance:20K
3.Pulse frequency: <10K
4.Ratio range:Zero point zero zero one-Sixty-five point five three five
FiveDisplay range:- 1999-+ 999999
6.Pulse level: low level-50V+0.5VHigh level: +4V+50V
Sevenpulse width:Minimum2uS
8.Contact capacity:AC220V 3A. DC24V 5A (Resistive load)
9.Installation: Disk-mounted and clamped
TenOpening size:Ninety-two+0.7XForty-four+0.5mm
ElevenEnvironmental temperature:-10C -+50Temperature
