Voltage to current signal module
Module parameters
1. Working voltage: 9V ~ 24V
2. Input voltage: 0.00V to 5.00V / 0.00V to 10.00V
3. Output current: 4.00MA to 20.00MA / 0.00mA to 20.00mA
4. Input method: J1 pad on the circuit board: open circuit (0 ～ 5V); short connection (0 ～ 10V) is open circuit by default.
5. Output method: J2 pad on the circuit board: open circuit (output 4.00mA ~ 20.00mA); short circuit (output 0.00mA ~ 20.00mA), default is open circuit
6. Control method: input voltage is converted into corresponding current
7. Application: voltage signal to current signal; remote data acquisition and control equipment;
8. Size: (length) 26mm * (width) 25mm * (height) 7mm
9. Module interface:
24V: positive power connector (9V ~ 24V).
G: Power ground interface.
IN: signal input interface (0.00V to 5.00V / 0.00V to 10.00V)
G: Power ground interface.
OUT: Signal output interface (4.00MA ～ 20.00MA / 0.00mA ～ 20.00mA)
G: Power ground interface.
Note: When outputting 0.00V ~ 10.00V, the power supply voltage should be 15V.
